I had replaced the ThrottleInner with the R6 ThrottleInner for the 2014 NINJA1000, which can be easily set to High Solo, but I wanted to feel like I could get up to speed instantly by opening the throttle a little more when driving long distances at high speeds, so I purchased this Φ44 inner pipe along with the same Active Throttle holder and the Z1000 Exclusive Throttle Wire. I bought this Φ44 inner pipe with the same Active Throttle holder and Exclusive Throttle Wire for Z1000.
I was satisfied with the speed without twisting my wrist too much, which made it much easier.
However, we need to be careful because the Throttle is a little heavier and opening the governor can be quite dangerous.
375,748 ~ VND (2,266 JPY) 378,567 VND Save 1%
Webike Point: +23~ pt
(3,814 VND)
Thông Tin Giao Hàng
-
Please select product form first.
Mô tả sản phẩm dưới đây được tự động dịch bởi Google.
Chi tiết sản phẩm
** Φ42, Φ44 không thể sử dụng được đối với người giữ Loại 2.
* Nó đã được đặt trong 2-loại trong đường kính núm vú : Φ42, Φ44 LOẠI LOẠI 1. Vui lòng kiểm traChủ khắc..
Tuyệt vời tính trượt, giảm tốc độ đường ống bên trong với nhựa thấp của lão hóa.
Rất nhiều lắp có thể thực hiện được nhờ việc sử dụng ròng rọc xốp.
Chú ý
* Nếu trong đó có bao gồm chỉ dẫn thì cũng được viết bằng tiếng Nhật.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
khách hàng đánh giá
Reviews with image
Oct 26, 2024
A little opening makes it easier.
Helpful?
Dec 11, 2023
ACTIVE teflon inner throttle pipe/grip in use with ACTIVE aluminium throttle holder
I installed this teflon inner pipe together with the ACTIVE aluminium throttle holder with the 2 fast throttle cables to operate the Yoshimura TMR-MJN40 racing carburetor. the size that i have chosen is the 40mm (which is the maximum for the ACTIVE throttle holder Type-2). It is a straight forward and easy installation, and after sucessful installation, the grip, the throttle response and operation of the TMR-MJN carburetor is much better and livelier. highly recommended upgrade even it is for normal carburetors.
View DetailHelpful?
May 17, 2023
This is an exclusive product for Active's Holder.
Introduced on MainMotorcycle's XJR1300C High Solo.
Throttle holder uses Active's Type-3.
The size is 44Φ, although the NORMAL is 37Φ, which is very lax,
44Φ to be about 63°, so it is a bin bin Spec.
If I feel tired from using it, I will 42Φ.
Helpful?
Aug 14, 2020
When the Grip heater is installed
The SEA BASS OEM Throttle is engraved with a Giza Giza and Rib to prevent the Grip from shifting.
I'm too lazy to shave off the Rib, so this Teflon (R) Use the Inner Pipe to attach the Grip heater.
It's a little pricey, but it's convenient because you can choose the diameter of the windings, so you can make it Large, which is close to OEM, or you can make it a little High Solo.
Helpful?
Aug 3, 2020
The diameter of the inner pipe can be changed.
This time I needed it for radiphone purposes, not for High Solo. I chose the Φ40, which is almost the same as the NORMAL, with the same throttle response.
If you don't like the accelerator operation at low speeds to become severe and difficult to ride, this is Recommendation.
Helpful?
New Custom Articles
